#include <MucStrip.h>

Inheritance diagram for MucStrip:

Public Member Functions
	MucStrip (int part, int segment, int layer, int id)

	MucStrip (const MucStrip &other)

MucStrip &	operator= (const MucStrip &other)

virtual	~MucStrip ()

int	GetType ()

double	GetCenterLine ()

double	GetHead ()

double	GetTail ()

double	GetPhi ()

int	GetPadNumber ()

Public Member Functions inherited from MucEntity
	MucEntity (int part, int segment, int layer)

	MucEntity (int part, int segment, int layer, int id)

	MucEntity (int part, int segment, int layer, int upDown, int id)

	MucEntity (int part, int segment, int layer, int upDown, int rpcId, int id)

	MucEntity (const MucEntity &other)

MucEntity &	operator= (const MucEntity &other)

virtual	~MucEntity ()

int	GetPart ()

int	GetSegment ()

int	GetLayer ()

int	GetUpDown ()

int	GetRpcId ()

int	GetID ()

double	GetTheta ()

double	GetRin ()

double	GetRout ()

double	GetRc ()

double	GetThin ()

double	GetW ()

double	GetH ()

double	GetL ()

double	GetWu ()

double	GetWd ()

double	GetArea ()

double	GetLocOrgInBes (int i)

double	GetObjRotToMot (int i)

double	GetObjOrgInBes (int i)

double	GetObjOrgInLoc (int i)

double *	GetLocOrgInBes ()

double *	GetObjRotToMot ()

double *	GetObjOrgInLoc ()

double *	GetObjOrgInBes ()

void	TransBesToLoc (double LocCoord[], double BesCoord[], double LocOrgInBes[], double Rot_z)

void	TransLocToBes (double LocCoord[], double BesCoord[], double LocOrgInBes[], double Rot_z)

Protected Member Functions
virtual void	Init ()

void	SetType ()

void	SetCenterLine ()

void	SetHead ()

void	SetTail ()

void	SetPhi ()

virtual void	SetThin ()

virtual void	SetW ()

virtual void	SetWu ()

virtual void	SetWd ()

virtual void	SetH ()

virtual void	SetL ()

virtual void	SetArea ()

void	SetPadNumber ()

void	SetEndcapStripInBes ()

void	SetBarrelStripInLoc ()

virtual void	SetLocOrgInBes ()

virtual void	SetObjOrgInBes ()

virtual void	SetObjOrgInLoc ()

Protected Member Functions inherited from MucEntity
virtual void	SetTheta ()

virtual void	SetRin ()

virtual void	SetRout ()

virtual void	SetRc ()

virtual void	SetObjRotToMot ()

virtual void	SetAlignment (double dx, double dy, double dz)

Additional Inherited Members
Protected Attributes inherited from MucEntity
int	m_Part

int	m_Segment

int	m_Layer

int	m_UpDown

int	m_RpcId

int	m_ID

double	m_Theta

double	m_Rin

double	m_Rout

double	m_Rc

double	m_Thin

double	m_W

double	m_H

double	m_L

double	m_Wu

double	m_Wd

double	m_Area

double	m_LocOrgInBes [3]

double	m_ObjRotToMot [3]

double	m_ObjOrgInBes [3]

double	m_ObjOrgInLoc [3]

Detailed Description

Definition at line 31 of file MucStrip.h.

Constructor & Destructor Documentation

◆ MucStrip() [1/2]

MucStrip::MucStrip	(	int	part,
		int	segment,
		int	layer,
		int	id )

Definition at line 18 of file MucStrip.cxx.

                                                             : MucEntity( part, segment, layer, id )
{
  MucStrip::Init();
  // m_MucPadChain = NULL;
}

Referenced by MucStrip(), and operator=().

◆ MucStrip() [2/2]

MucStrip::MucStrip ( const MucStrip & other )

Definition at line 25 of file MucStrip.cxx.

                                          : MucEntity( other )
{
  m_Type        = other.m_Type;
  m_CenterLine  = other.m_CenterLine;
  m_Head        = other.m_Head;
  m_Tail        = other.m_Tail;
  m_Phi         = other.m_Phi;
 
  // m_MucPadChain  = other.m_MucPadChain;
}

◆ ~MucStrip()

MucStrip::~MucStrip ( )

virtual

Definition at line 55 of file MucStrip.cxx.

{
  // delete m_MucPadChain;
}

Member Function Documentation

◆ GetCenterLine()

double MucStrip::GetCenterLine ( )

Definition at line 89 of file MucStrip.cxx.

89{ return m_CenterLine; }

◆ GetHead()

double MucStrip::GetHead ( )

Definition at line 90 of file MucStrip.cxx.

90{ return m_Head; }

◆ GetPadNumber()

int MucStrip::GetPadNumber ( )

Definition at line 93 of file MucStrip.cxx.

93{ return m_PadNumber; }

◆ GetPhi()

double MucStrip::GetPhi ( )

Definition at line 92 of file MucStrip.cxx.

92{ return m_Phi; }

◆ GetTail()

double MucStrip::GetTail ( )

Definition at line 91 of file MucStrip.cxx.

91{ return m_Tail; }

◆ GetType()

int MucStrip::GetType ( )

Definition at line 88 of file MucStrip.cxx.

88{ return m_Type; }

Referenced by MucGeoMgr::CreateOnlineStripGeo(), and MucGeoMgr::CreateStrip().

◆ Init()

void MucStrip::Init ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 61 of file MucStrip.cxx.

{
  SetType();
  SetW();
  SetWu();
  SetWd();
  SetCenterLine(); // use strip width
  SetHead();
  SetTail();
  SetPhi();
  
  SetThin();
  SetH();
  SetL();
  SetPadNumber();
  
  SetLocOrgInBes();
  SetObjRotToMot();
  
  SetEndcapStripInBes();
  SetBarrelStripInLoc();
  
  SetObjOrgInBes();
  SetObjOrgInLoc(); 
}

Referenced by MucStrip().

◆ operator=()

MucStrip & MucStrip::operator= ( const MucStrip & other )

Definition at line 37 of file MucStrip.cxx.

{
  if( this == &other) return *this;
 
  MucEntity::operator =(other);
  
  m_Type        = other.m_Type;
  m_CenterLine  = other.m_CenterLine;
  m_Head        = other.m_Head;
  m_Tail        = other.m_Tail;
  m_Phi         = other.m_Phi;
  
  // m_MucPadChain  = other.m_MucPadChain;
  
  return *this;
}

◆ SetArea()

void MucStrip::SetArea ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 346 of file MucStrip.cxx.

{
  m_Area = m_W*m_L/100;
}

◆ SetBarrelStripInLoc()

void MucStrip::SetBarrelStripInLoc ( )

protected

Definition at line 456 of file MucStrip.cxx.

{
  int j = m_Layer;
  int n = m_ID;
  
  int maxStrip = 0;
  double x, y, z = 0;
   
  if( m_Type == ZSTR )          maxStrip = B_ZSTR_NUM;    // odd layer
  else if( m_Segment != B_TOP ) maxStrip = B_PHISTR_NUM;  // even layer not top segment
  else                          maxStrip = B_TOPSTR_NUM;  // even layer top segment
  
  if( m_Segment != B_TOP )  // not top segment
  {
    if( m_Type == ZSTR )  // odd layer, ZSTR
    {
    // Set x
    if( n == 0 )
    x = ( B_BOX_WT[j] - 2*B_BOX_DT[SL_DOWN] +  (maxStrip-2)*B_STR_DST[j] + STR_GAP )/4.0;
    else if( n == (maxStrip-1) )
    x = ( 2*B_BOX_DT[SL_DOWN] - B_BOX_WT[j] - (maxStrip-2)*B_STR_DST[j] - STR_GAP )/4.0;
    else
    x =( ((maxStrip-1) - 2*n) * B_STR_DST[j] )/2.0;
    
    // Set y
    y = 0.;
    
    // Set z
    z = 0.;
    }
    else                  // even layer, phi
    {
      // Set x
      x = 0.;
      
      // Set y
      y = 0.;
      
      // Set Z
      if( n == 0 )
        z = -B_BOX_LT/4.0 + B_BOX_DZ[SL_DOWN]/2.0 - B_STR_DST[j]*(B_PHISTR_NUM-2)/4.0;
      else if( n == (B_PHISTR_NUM - 1) )
        z = B_BOX_LT/4.0 - B_BOX_DZ[SL_DOWN]/2.0 + B_STR_DST[j]*(B_PHISTR_NUM-2)/4.0;
      else
        z = ( 2*n - B_PHISTR_NUM + 1 ) * B_STR_DST[j] / 2.0;
    }
  }     // end not top segment
  else  // top segment
  {
    if( m_Type == ZSTR )  // odd layer, z
    {
      // Set x
      if( n == 0 )
        x = B_BOX_WT[j]/4.0 - B_BOX_DT[SL_DOWN]/2.0 +  (maxStrip-2)*B_STR_DST[j]/4.0 + STR_GAP/4.0;
      else if( n == (maxStrip-1) )
        x = -B_BOX_WT[j]/4.0 + B_BOX_DT[SL_DOWN]/2.0 -  (maxStrip-2)*B_STR_DST[j]/4.0 - STR_GAP/4.0;
      else
        x = ( (maxStrip-1) - 2*n ) * B_STR_DST[j] / 2.0;
      
      // Set y
      y = 0.;
      
      // Set z
      if( (n > (B_ZSTR_NUM/2 - 1 - B_ZSTR_CUT_NUM[j])) && (n < (B_ZSTR_NUM/2 + B_ZSTR_CUT_NUM[j])) )  // be cut
        z = -( (j==0) ? B_ZSTR_CUT[1] : B_ZSTR_CUT[0] )/2;
      else  // no cut
        z = 0.;
    } 
    else                  // even layer, phi
    {
      // Set x
      if( n < B_PHISTR_CUT_NUM )  // no cut
        x = 0.;    
      else                        // be cut
      {
        if( n < B_PHISTR_NUM )
          x = -B_BOX_WT[j]/4.0 - B_PHISTR_CUT/4.0 + B_BOX_DZ[SL_DOWN]/2.0;
        else
          x = B_BOX_WT[j]/4.0 + B_PHISTR_CUT/4.0 - B_BOX_DZ[SL_DOWN]/2.0;
      }
      
      // Set y 
      y = 0.;
      
      // Set z
      if( n < B_PHISTR_NUM )
      {
        if( n == 0 )
          z = -B_BOX_LT/4.0 + B_BOX_DZ[SL_DOWN]/2.0 - B_STR_DST[j]*(B_PHISTR_NUM-2)/4.0;
        else if( n == (B_PHISTR_NUM - 1) )
          z = B_BOX_LT/4.0 - B_BOX_DZ[SL_DOWN]/2.0 + B_STR_DST[j]*(B_PHISTR_NUM-2)/4.0;
        else
          z = ( 2*n - B_PHISTR_NUM + 1 ) * B_STR_DST[j] / 2.0;
      }
      else
      {
        if( n == (B_TOPSTR_NUM-1) )
          z = B_BOX_LT/4.0 - B_BOX_DZ[SL_DOWN]/2.0 + B_STR_DST[j]*(B_PHISTR_NUM-2)/4.0;
        else
          z = ( 2*n - 3*B_PHISTR_NUM + 2*B_PHISTR_CUT_NUM + 1 ) * B_STR_DST[j]/2.0;
      }
    } // end even       
  } // end top segment
 
  m_ObjOrgInLoc[0] = x;
  m_ObjOrgInLoc[1] = y;
  m_ObjOrgInLoc[2] = z;    
  
  // limit cut
  for( int i=0; i<3; i++ ) {
    if( fabs(m_ObjOrgInLoc[i]) < ERR_LIMIT )
    m_ObjOrgInLoc[i] = 0.;
  } 
}

Referenced by Init().

◆ SetCenterLine()

void MucStrip::SetCenterLine ( )

protected

Definition at line 121 of file MucStrip.cxx.

{
  // Base on strips width and structure correlations
  // Endcap only 
  
  int segFlag = 0;
  
  if( (m_Layer+1)%2 == 1 )  // 1,3,5,7
  {
    if( m_Segment < 2 ) segFlag = 1;
    else                segFlag = -1;
    
    if( m_ID == 0 ) m_CenterLine = segFlag * (E_GP_DY+E_STRPLN_DA+m_W/2.0); // NO.0
    else if( m_ID != E_STR_NUM-1 )                                          // NO.1~62
      m_CenterLine = segFlag * ( E_XSTR_OFFSET + m_ID*E_STR_DST );
    else                                                                    // NO.63 end strip
      m_CenterLine = segFlag * ( E_XSTR_OFFSET + (E_STR_NUM-2)*E_STR_DST + (E_STR_DST + m_W + STR_GAP)/2);
  }
  else                      // 2,4,6,8
  {
    if( m_Segment%3 == 0 )  segFlag = 1;
    else                    segFlag = -1;
    
    if( m_ID == 0 ) m_CenterLine = segFlag * (E_GP_DX+E_STRPLN_DA+m_W/2.0); // NO.0
    else if(m_ID != E_STR_NUM-1)                                            // NO.1~62
      m_CenterLine = segFlag * ( E_YSTR_OFFSET + m_ID*E_STR_DST );
    else                                                                    // NO.63 end strip
      m_CenterLine = segFlag * ( E_YSTR_OFFSET + (E_STR_NUM-2)*E_STR_DST + (E_STR_DST + m_W + STR_GAP)/2);
  }
}

Referenced by Init().

◆ SetEndcapStripInBes()

void MucStrip::SetEndcapStripInBes ( )

protected

Definition at line 423 of file MucStrip.cxx.

{   
  double x, y, z;
  
  // Set x 
  if( (m_Layer+1)%2 == 0 )  // even layer
    x = m_CenterLine;
  else                      // odd layer
    x = ( m_Head + m_Tail )/2;
  
  // Set y
  if( (m_Layer+1)%2 == 0 )  // even layer
    y = ( m_Head + m_Tail )/2;
  else                      // odd layer
    y = m_CenterLine;
  
  // Set z
  z = 0.;
  for(int i=0; i<m_Layer+1; i++) z += E_AS_TH[i];
  
  z += m_Layer * AS_GAP;
  z = ( (E_AS_ZMAX - E_AS_TOTAL_TH + z) + AS_GAP/2.0 ) * cos( m_Part*MUC_PI/2.0 );
  
  m_ObjOrgInBes[0] = x;
  m_ObjOrgInBes[1] = y;   
  m_ObjOrgInBes[2] = z;
  
  // limit cut
  for( int i=0; i<3; i++ ) 
    if( fabs(m_ObjOrgInBes[i]) < ERR_LIMIT ) m_ObjOrgInBes[i] = 0.;   
}

Referenced by Init().

◆ SetH()

void MucStrip::SetH ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 298 of file MucStrip.cxx.

{
  m_H = STR_TH;
}

Referenced by Init().

◆ SetHead()

void MucStrip::SetHead ( )

protected

Definition at line 153 of file MucStrip.cxx.

{
  int segFlag = 0;
  
  // base on strips width and correlations
  if( m_ID+1 < HEAD_TURN_STR_NUM[m_Layer][0] )
    m_Head = FIRST_TURN_HEAD[m_Layer][0];
  else if( m_ID+1 == HEAD_TURN_STR_NUM[m_Layer][0] )
    m_Head = FIRST_TURN_HEAD[m_Layer][1];
  else if( (m_ID+1 > HEAD_TURN_STR_NUM[m_Layer][0]) && (m_ID+1 < HEAD_TURN_STR_NUM[m_Layer][1]) )
    m_Head = FIRST_TURN_HEAD[m_Layer][1] - ( m_ID + 1 - HEAD_TURN_STR_NUM[m_Layer][0] )*E_STR_DST;
  else if( m_ID+1 >= HEAD_TURN_STR_NUM[m_Layer][1] )
    m_Head = SECOND_TURN_HEAD[m_Layer%2];
  
  
  if( (m_Layer+1)%2 == 1 )  // 1,3,5,7
  {
    if( m_Segment%3 ==0 ) segFlag = 1;
    else segFlag = -1;
  }
  else                      // 2,4,6,8
  {
    if( m_Segment < 2 ) segFlag = 1;
    else segFlag = -1;
  }
  
  m_Head *= segFlag;
}

Referenced by Init().

◆ SetL()

void MucStrip::SetL ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 304 of file MucStrip.cxx.

{
  if( m_Part==BRID )  // barrel
  {
    int ZCUT_HEAD_NUM = B_ZSTR_NUM/2 - B_ZSTR_CUT_NUM[m_Layer] - 1;
    int ZCUT_TAIL_NUM = B_ZSTR_NUM/2 + B_ZSTR_CUT_NUM[m_Layer];
    
    if( m_Segment != B_TOP ) // not top segment
    {
      if( (m_Layer+1)%2 == 1) // odd layer, Z 
        m_L = B_BOX_LT - 2*B_BOX_DZ[SL_DOWN];
      else                    // even layer, phi
        m_L = B_BOX_WT[m_Layer] - 2*B_BOX_DZ[SL_DOWN];
    }
    else            // top segment
    {
      if((m_Layer+1)%2 == 1)  // odd layer, z
      {
        if( m_ID > ZCUT_HEAD_NUM && m_ID < ZCUT_TAIL_NUM )  // be cut
        {
          if( m_Layer == 0 )
            m_L = B_BOX_LT - 2*B_BOX_DZ[SL_DOWN] - B_ZSTR_CUT[1];
          else
            m_L = B_BOX_LT - 2*B_BOX_DZ[SL_DOWN] - B_ZSTR_CUT[0];
        }
        else  // no cut
          m_L = B_BOX_LT - 2*B_BOX_DZ[SL_DOWN];
      }
      else                    // even layer, phi
      {
        if( m_ID < B_PHISTR_CUT_NUM ) // no cut
          m_L = B_BOX_WT[m_Layer] - 2*B_BOX_DZ[SL_DOWN];
        else                          // be cut
          m_L = (B_BOX_WT[m_Layer] - 2*B_BOX_DZ[SL_DOWN] - B_PHISTR_CUT)/2;
      }
    } // End top segment
  }
  else  // endcap
    m_L = fabs( m_Head - m_Tail );
}

Referenced by Init().

◆ SetLocOrgInBes()

void MucStrip::SetLocOrgInBes ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 373 of file MucStrip.cxx.

{
  double x, y, z = 0 ;
  
  if( m_Part == BRID )
  {
    x = ( B_AS_RMIN[m_Layer] - AS_GAP/2.0 ) * cos( m_Segment * ( MUC_PI/4.0 ) );
    y = ( B_AS_RMIN[m_Layer] - AS_GAP/2.0 ) * sin( m_Segment * ( MUC_PI/4.0 ) );
    z = 0.;
  } // barrel
  else
  {
    //------------- set x and y --------------------
    // segment 0 as reference 
    x = (E_AS_RMAX - E_BOX_DR - E_STRPLN_DB[(m_Layer==0)?0:1] + E_GP_DX + E_STRPLN_DA) / 2.0;
    y = (E_AS_RMAX - E_BOX_DR - E_STRPLN_DB[(m_Layer==0)?0:1] + E_GP_DY + E_STRPLN_DA) / 2.0;
    
    // x, y signs of coordinate different by segment 
    if      ( m_Segment == 0 )  { ;               }
    else if ( m_Segment == 1 )  { x = -x;         }
    else if ( m_Segment == 2 )  { x = -x; y = -y; }
    else                        { y = -y;         }
    
    //-------------- set z --------------------------
    for( int i=0; i<m_Layer+1; i++ ) z += E_AS_TH[i];
                    
    z += m_Layer * AS_GAP;
    z += (E_AS_ZMAX - E_AS_TOTAL_TH) + AS_GAP/2.0; 
    z *= cos( m_Part*MUC_PI/2.0 );
  } // else, endcap
  
  m_LocOrgInBes[0] = x;
  m_LocOrgInBes[1] = y;
  m_LocOrgInBes[2] = z;
  
  // limit cut
  for( int i=0; i<3; i++ ) 
    if( fabs(m_LocOrgInBes[i]) < ERR_LIMIT ) m_LocOrgInBes[i] = 0;
}

Referenced by Init().

◆ SetObjOrgInBes()

void MucStrip::SetObjOrgInBes ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 572 of file MucStrip.cxx.

{
  if( m_Part == BRID )
  {
    MucEntity::TransLocToBes( m_ObjOrgInBes, m_ObjOrgInLoc, m_LocOrgInBes, m_Phi );      
    // limit cut
    for( int i=0; i<3; i++ ) 
      if( fabs(m_ObjOrgInBes[i]) < ERR_LIMIT ) m_ObjOrgInBes[i] = 0.0;
  }
}

Referenced by Init().

◆ SetObjOrgInLoc()

void MucStrip::SetObjOrgInLoc ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 584 of file MucStrip.cxx.

{
  if( m_Part != BRID )
  {
    MucEntity::TransBesToLoc( m_ObjOrgInLoc, m_ObjOrgInBes, m_LocOrgInBes, m_Phi );  
    // limit cut
    for( int i=0; i<3; i++ ) 
      if( fabs(m_ObjOrgInLoc[i]) < ERR_LIMIT ) m_ObjOrgInLoc[i] = 0.;
  }
}

Referenced by Init().

◆ SetPadNumber()

void MucStrip::SetPadNumber ( )

protected

Definition at line 352 of file MucStrip.cxx.

{
  int    n        = 0;
  double fn       = 0;
  
  if(m_W == 0) {
    cout<<"Error, strip width = 0!"<<endl;
    m_PadNumber = 0;
  }
  else
  {
    fn = (m_L/m_W);
    n  = (int)fn;
    
    if( (fn - n) > 0.3 )  m_PadNumber = n + 1;
    else                  m_PadNumber = n;
  }
}

Referenced by Init().

◆ SetPhi()

void MucStrip::SetPhi ( )

protected

Definition at line 220 of file MucStrip.cxx.

{
  if ( m_Part == BRID ) // barrel 
    m_Phi = B_PHI[m_Segment] * (MUC_PI/4.0);      
  else                 // endcap , all phi is zer
    m_Phi = 0.;   
}

Referenced by Init().

◆ SetTail()

void MucStrip::SetTail ( )

protected

Definition at line 183 of file MucStrip.cxx.

{
  int segFlag = 0;
  
  if( (m_Layer+1)%2 == 1 )  // 1,3,5,7
  {
    if( m_Segment%3 ==0 ) segFlag = 1;
    else                  segFlag = -1;
    
    if( m_ID+1 < TAIL_TURN_STR_NUM[0] )
      m_Tail = ODD_TURN_POINT_TAIL[(m_Layer==0)?0:1][0];
    else if( m_ID+1 == TAIL_TURN_STR_NUM[0] )
      m_Tail = ODD_TURN_POINT_TAIL[(m_Layer==0)?0:1][1];
    else if( m_ID+1 > TAIL_TURN_STR_NUM[0] )
      m_Tail = ODD_TURN_POINT_TAIL[(m_Layer==0)?0:1][1]-( m_ID + 1 - TAIL_TURN_STR_NUM[0] )* E_STR_DST;
    if( m_ID == E_STR_NUM - 1 )
      m_Tail = ODD_TURN_POINT_TAIL[(m_Layer==0)?0:1][1]-( m_ID -TAIL_TURN_STR_NUM[0] ) * E_STR_DST - ( E_STR_DST + m_W + STR_GAP )/2;
  }
  else                       // 2,4,6,8
  {
    if( m_Segment < 2 ) segFlag = 1;
    else                segFlag = -1;
    
    if( m_ID+1 < TAIL_TURN_STR_NUM[1] )
      m_Tail = EVEN_TURN_POINT_TAIL[0];
    if( m_ID+1 == TAIL_TURN_STR_NUM[1] )
      m_Tail = EVEN_TURN_POINT_TAIL[1];
    if( m_ID+1 > TAIL_TURN_STR_NUM[1] )
      m_Tail = EVEN_TURN_POINT_TAIL[1] - ( m_ID + 1 - TAIL_TURN_STR_NUM[1] ) * E_STR_DST;
    if( m_ID == E_STR_NUM - 1 )
      m_Tail = EVEN_TURN_POINT_TAIL[1]-(m_ID - TAIL_TURN_STR_NUM[1]) * E_STR_DST - ( E_STR_DST + m_W + STR_GAP )/2;
  }
  
  m_Tail *= segFlag;
}

Referenced by Init().

◆ SetThin()

void MucStrip::SetThin ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 229 of file MucStrip.cxx.

{
  m_Thin = STR_TH;
}

Referenced by Init().

◆ SetType()

void MucStrip::SetType ( )

protected

Definition at line 108 of file MucStrip.cxx.

{
  if( m_Part == BRID )  {
    if( (m_Layer+1)%2 == 1 )  m_Type = ZSTR;
    else                      m_Type = PHISTR;
  }
  else {
    if( (m_Layer+1)%2 == 1 )  m_Type = XSTR;
    else                      m_Type = YSTR;
  }
}

Referenced by Init().

◆ SetW()

void MucStrip::SetW ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 235 of file MucStrip.cxx.

{
  if( m_Part == BRID )
  {
    // Set maximum strip 
    int maxStrip;
    if( (m_Layer+1)%2 == 1 )
      maxStrip = B_ZSTR_NUM;      // odd layer
    else if( m_Segment != B_TOP )
      maxStrip = B_PHISTR_NUM;    // even layer not top segment
    else
      maxStrip = B_TOPSTR_NUM;    // even layer top segment
    
    if( (m_Layer+1)%2 == 1 )  // odd layer, z
    {
      if( m_ID > 0 && m_ID < (maxStrip-1))  // not marginal strip
        m_W = B_STR_DST[m_Layer] - STR_GAP;
      else                                  // marginal strip
        m_W = (B_BOX_WT[m_Layer] - 2*B_BOX_DT[SL_DOWN] - (maxStrip-2)*B_STR_DST[m_Layer] - STR_GAP)/2;
    }
    else                      // even layer, phi
    {
      if( m_ID >0 && m_ID < (maxStrip-1) )                    // not marginal strip
        m_W = B_STR_DST[m_Layer] - STR_GAP;
      else                                                    // marginal strip
        m_W = B_BOX_LT/2 - B_BOX_DZ[SL_DOWN] - B_STR_DST[m_Layer]*(B_PHISTR_NUM-2)/2;
      
      if( (maxStrip == B_TOPSTR_NUM) && (m_ID == (B_PHISTR_NUM - 1)) )  // special marginal strip
        m_W = B_BOX_LT/2 - B_BOX_DZ[SL_DOWN] - B_STR_DST[m_Layer]*(B_PHISTR_NUM-2)/2;
    }
  } // End barrel
  else
  {
    // Strip0:48;
    // Strip1~62: 33;
    // Strip63:   L0: 34; L2/4/6: 43; L1/3/5/7: 53 
    if(m_ID ==0 ) m_W = E_FIRST_STR_WT;
    else if(m_ID != E_STR_NUM-1) m_W = E_STR_WT; // NO.1~62
    else // NO.63, end strip
    {
      if((m_Layer+1)%2!=0)  // 0,2,4,6
      {
        if(m_Layer==0) m_W = 31;
        else m_W = 43;
      }
      else m_W = 53;        // 1,3,5,7
    }
  }
}

Referenced by Init().

◆ SetWd()

void MucStrip::SetWd ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 292 of file MucStrip.cxx.

{
  m_Wd = m_W;
}

Referenced by Init().

◆ SetWu()

void MucStrip::SetWu ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 286 of file MucStrip.cxx.

{
  m_Wu = m_W;
}

Referenced by Init().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ MucStrip() [1/2]

◆ MucStrip() [2/2]

◆ ~MucStrip()

Member Function Documentation

◆ GetCenterLine()

◆ GetHead()

◆ GetPadNumber()

◆ GetPhi()

◆ GetTail()

◆ GetType()

◆ Init()

◆ operator=()

◆ SetArea()

◆ SetBarrelStripInLoc()

◆ SetCenterLine()

◆ SetEndcapStripInBes()

◆ SetH()

◆ SetHead()

◆ SetL()

◆ SetLocOrgInBes()

◆ SetObjOrgInBes()

◆ SetObjOrgInLoc()

◆ SetPadNumber()

◆ SetPhi()

◆ SetTail()

◆ SetThin()

◆ SetType()

◆ SetW()

◆ SetWd()

◆ SetWu()